BGMCQ - 121 3677 FIXER AND REPLENISHER,PROCESS E-6
- MSDS: BGMCQ
- Manufacturer: EASTMAN KODAK CO
- Product Name: 121 3677 FIXER AND REPLENISHER,PROCESS E-6
- National Stock Number: 6750-01-106-0011
Product Identification
Product ID:121 3677 FIXER AND REPLENISHER,PROCESS E-6
MSDS Date:02/12/1991
FSC:6750
NIIN:01-106-0011
MSDS Number: BGMCQ
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 716-722-5151/800-242-2424
Cage: 19139
Contractor
Telephone: 716-722-5151/(800) 242-2424
Cage: 19139
Ingredients
AMMONIUM THIOSULFATE
CAS: 7783-18-8
RTECS: XN6465000
Fraction By Weight: 50-55%
SODIUM BISULFITE (SASA III)
CAS: 7631-90-5
RTECS: VZ2000000
Fraction By Weight: 5-10%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
AMMONIUM SULFITE
CAS: 10196-04-0
RTECS: WT3505000
Fraction By Weight: 1-5%
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
SODIUM SULFITE
CAS: 7757-83-7
RTECS: WE2150000
Fraction By Weight: 1-5%
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 35-45%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-EYES:MAY CAUSE
IRRITATION.SKIN/INHALATION:LOW HAZARD FOR USUAL INDUSTRIAL
HANDLING.INGESTION:EXPECTED TO BE A LOW INGESTION
HAZARD.CHRONIC-NOT GIVEN.
Effects of Overexposure:SEE HEALTH HAZARDS SECTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:GET MEDICAL CARE IF NEEDED.EYE:IMMEDIATELY FLUSH WITH WATER
FOR 15 MINUTES HOLDING EYELIDS OPEN.SKIN:FLUSH WITH PLENTY OF WATER
& WASH WITH A NON-ALKALINE (ACID) TYPE OF SKIN
CLEANSER.INGESTION:IF CON SCIOUS,DRINK 1-2 GLASSES OF
WATER.INHALATION:REMOVE TO FRESH AIR.
Fire Fighting
Flash Point:NONE
Extinguishing Media:MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING TO PREVENT CONTACT WITH SKIN AND EYES.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.
Accidental Release
Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNT OF WATER.
Handling
Handling and Storage Precautions:STORAGE-KEEP CONTAINER TIGHTLY CLOSED
AWAY FROM ACIDS AND BASES.
Other Precautions:THIS FORMULATION IS EXPECTED TO CAUSE OXYGEN
DEPLETION IF DISCHARGED DIRECTLY TO THE ENVIRONMENT WITHOUT
TREATMENT.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED SELF-CONTAINED BREATHING
APPARATUS IF NEEDED.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GOGGLES WITH SIDE SHIELDS
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:FOLLOW GOOD INDUSTRIAL HYGIENE PRACTICE.
Supplemental Safety and Health
SOLN NR 4510
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17
Vapor Density:0.6
Spec Gravity:1.37
pH:6.2
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR COLORLESS SOLUTION; ODORLESS
Percent Volatiles by Volume:38(WT)
Stability
Stability Indicator/Materials to Avoid:YES
STRONG MINERAL ACIDS, STRONG BASES
Stability Condition to Avoid:HIGH TEMPERATURES AND FLAMES
Hazardous Decomposition Products:OXIDES OF SULFUR
Disposal
Waste Disposal Methods:DISCHARGE,TREATMENT OR DISPOSAL MAY BE SUBJECT
TO LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.